How to

replace wax filter

About wax protection

Your ear canal produces earwax which may clog up the earpiece. Earwax is one of the main causes of problems in hearing aids. Most hearing aids come with a filter to avoid that earwax clog sound. For ITE hearing aids the filter is placed in the hearing aid, for RITE and BTE hearing aids the filter is placed either in the speaker and/or in the mould.


Use the wax filter and tools to clean away any accumulated wax each day. Consult your hearing care professional about the specific wax filter in your hearing aids and how it can be replaced or look in the Instructions for use which you have received together with your hearing aid from your hearing aid professional.


Important notice!

Always use the same type of wax filter as that originally supplied with the hearing aid. If you are in any doubt about the use or replacement of wax filters, contact your hearing care professional.

Locate nearest hearing centre

How to replace a ProWax miniFIT filter

  • 1. Tool

    Remove the tool from the shell. The tool has two pins, one empty for removal and one with the new wax filter.

  • 2. Remove

    Push the empty pin into the wax filter in the speaker and pull it out.

  • 3. Insert

    Insert the new wax filter using the other pin, remove the tool and throw it away.

  • 4. Final

    The speaker should look like above when you have replaced the wax filter.

Watch the instruction video on how to change the wax filter:

[iframe data-category-consent="cookie_cat_marketing" data-consent-src="//wdh.23video.com/12841282.ihtml/player.html?token=9fdde6a7c95cb318d97a26ec56529b8c&source=embed&photo%5fid=13343920" width="900" height="655" frameborder="0" border="0" scrolling="no" allowfullscreen="1" mozallowfullscreen="1" webkitallowfullscreen="1" gesture="media"][/iframe]

Watch video